The complete set of gypsum board equipment can be divided into four dimensions: automation level, forming process, raw material adaptability, and finished product type. Different equipment is suitable for different production scenarios, and the specific categories are as follows:
Divided by degree of automation
Fully automatic gypsum board production line: integrating automatic batching, mixing, pouring, shaping, demolding, curing, and palletizing, using a PLC centralized control system, the entire process from feeding to finished products is automatically connected, with only 3-5 employees. The production capacity is large and the finished product rate is stable at over 98%, suitable for continuous mass production of large-scale building materials enterprises.
Semi automatic single machine equipment: key processes retain manual assistance, with lower initial investment, flexible production scheduling, suitable for small batch and multi variety production scenarios, and suitable for small and medium-sized building materials factories entering the industry in the early stages.
Divided by molding process
Formwork casting equipment: The produced boards have high density, uniform specifications, excellent strength and sound insulation performance, suitable for producing high standard partition boards, and have strong adaptability to engineering scenarios with high quality requirements for finished products.
Flat die extrusion molding equipment: focuses on continuous assembly line production, with obvious production efficiency advantages. It can operate continuously for a long time without interruption, with relatively limited adjustment of sheet thickness, making it suitable for standardized large-scale production scenarios.
Divided by raw material adaptability
Specialized equipment for desulfurization gypsum: Optimized drying, calcination, and mixing processes for desulfurization gypsum in power plants, which can directly utilize low-cost industrial by-product gypsum and significantly reduce raw material costs. It is currently the mainstream choice for new gypsum board production lines.
Natural gypsum universal equipment: adapted to natural gypsum raw materials, with mature and stable processes, suitable for traditional production scenarios in areas rich in natural gypsum resources.
Divided by finished product type
Standard gypsum solid wall panel equipment: The solid gypsum board produced has high strength, good nail holding force, and excellent sound insulation performance, and is mostly used in public building scenes with partition walls and requirements for wall load-bearing.
Gypsum hollow strip board equipment: produces hollow gypsum boards with internal holes, which have light weight, save raw materials, outstanding sound insulation performance, and are suitable for rapid construction of interior walls in residential and office buildings.
The core supporting subsystem of the gypsum board complete equipment also includes four core modules: batching and metering system, mixing and forming system, mold quick change system, and PLC centralized control system. The board specifications can be flexibly adjusted by replacing the shaping mold, achieving multi use of one machine and greatly improving equipment utilization.
Linyi Jinhao Machinery Co., Ltd. is a manufacturer mainly engaged in the production, sales, and service of complete sets of gypsum board equipment, gypsum powder equipment, and other mechanical equipment.
The various information published on this website is for reference only and does not represent the position or viewpoint of this website. It does not constitute any investment, medical, legal or decision-making advice. Any actions taken by users based on the information on this website are at their own risk, and this website does not assume any direct or indirect responsibility. This website does not assume any responsibility for the authenticity, accuracy, completeness, or legality of its content.